The Science Archive

Flying Kites to Harvest High-Altitude Wind

News explainer · Engineering · 2008

This news feature from May 2008 explained why some engineers wanted to replace tall turbines with kites. The idea was old. What had changed was the availability of strong modern materials and computer control.

A turbine's blade tips do most of the work because they move fastest. A kite acts like that tip alone, with no tower, hub or gearbox, and its pull on a tether turns a generator. Wind is also stronger and steadier higher up: roughly 4.6 metres a second at a typical turbine height of 80 metres, and about 7.2 at 800 metres. Because available power rises with the cube of wind speed, that gives almost four times the power, and more again higher up.

Several teams were building prototypes. Test flights produced a few kilowatts, against about 5 megawatts for a large turbine. In the designs described, a kite pulls tethers off winches to spin generators, then is reeled back in using a small share of the power produced, about 12 per cent in one estimate. One group planned a stack of kites on a single line.

Open problems included keeping kites aloft in lulls, reducing drag during reel-in and automating control. Simulations suggested that flying a figure of eight keeps lift high. Whether the cost could beat conventional power was still unproven.

This is a summary written for the archive. It is general information only.